Bearing housing installation:
1, standard type
Several methods of mounting the bearing housing with snap rings and retaining plates.
Mounting the bearing with the set screw will cause the bearing casing to deform and should be avoided as much as possible.
2, flange type
When installing a flange type linear bearing, the precision of the surface of the bearing housing must be accurate.
3, adjustable type (small opening type)
The bearing is perpendicular to the opening in the bearing housing to obtain a uniform preload in the circumferential direction.
4, large opening type
If used in conjunction with a suitable housing, large-open bearings can also be adjusted for clearance, even with light preload.
5, precautions during installation
When the linear bearing is installed in the bearing housing, auxiliary work should be used to avoid direct tapping of the end face or the sealing ring. The bearing should be evenly introduced, and the buffer plate should be used to load it with a gentle tap.
For more information and purchase please visit: https://www.supplyforever.com
