In daily use, many people do not pay attention to the lubrication of self-aligning ball bearings. They believe that lubrication has little effect on the bearings. However, this often leads to a reduction in the life of the bearing. What is the benefit of the lubrication of the koyo bearing?
a. Oil bath lubricating oil bath lubrication is the most common lubrication method, suitable for lubrication of low and medium speed bearings. A part of the self-aligning ball bearing is immersed in the groove, and the lubricating oil is brought up by the rotating bearing parts, and then flows back. The oil level of the oil sump should be slightly lower than the center of the lowest rolling element.
b. Drip oil lubrication Drip oil lubrication is suitable for bearing parts that need to supply lubricating oil quantitatively. The amount of oil dripping is generally one drop every 3-8 seconds. Excessive oil quantity will cause the temperature of koyo bearing to increase.
c. Circulating oil lubrication The oil pump is used to transport the filtered oil to the self-aligning ball bearing parts, and then filtered and cooled by the lubricating oil after the bearing. Since the circulating oil can take away a certain amount of heat and cool the koyo bearing, this method is suitable for bearing parts with a higher rotational speed.
d. Spray lubrication Dry air is mixed with lubricating oil through a sprayer to form an oil mist. In the jet bearing, the air flow can effectively cool the bearing and prevent the intrusion of impurities. This method is suitable for the lubrication of high speed, high temperature self-aligning ball bearing components.
e. Injection lubrication The high-pressure oil is injected into the bearing through the nozzle by the oil pump, and the oil injected into the koyo bearing flows into the oil groove through the other end of the bearing. When the bearing rotates at high speed, the rolling elements and the cage also form a gas flow at the relatively high rotation speed of the surrounding air. It is difficult to send the lubricating oil to the bearing by the general lubrication method. At this time, the lubricating oil must be sprayed by the high-pressure injection method. In self-aligning ball bearings, the position of the nozzle should be between the inner ring and the center of the cage.
Since the temperature is affected by lubrication, speed, load, and environment, the values in the table only indicate the approximate temperature range. Lubrication of bearing lubrication has an important influence on the fatigue life of koyo bearings and friction, wear, temperature rise, vibration, etc. Without normal lubrication, self-aligning ball bearings cannot work. Analysis of the cause of bearing damage indicates that about 40% of bearing damage is associated with poor lubrication. Therefore, good lubrication of the bearings is an effective measure to reduce bearing friction and wear.
For more information and purchase please visit: https://www.supplyforever.com
