Woodworking engraving machine is one of the most widely used mechanical equipment in wood carving processing. According to its different operation modes, it can be divided into three different types. The engraving machine will inevitably have various problems in the long-term use. What are the common failures of the general engraving machine? Here is a brief introduction for everyone.
What should I do if the motor is hot?
The engraving machine is prone to scalding during prolonged use, mainly because the pump is not working properly. If there is hot, you should first check whether the pump is working, and also consider whether the circulating water is in a low liquid state, so as not to affect the normal operation of the motor.
What should I do if the motor does not move?
If the woodworking engraving machine does not move, the reason is actually more. The main reason is to check whether there is any circuit problem in the circuit. If there is a short circuit, it will directly affect the use effect of the motor. You can also check if there is a problem with the wire. If there is a problem with the wire, you can replace the wire directly.
What should I do if the motor reverses?
The reversal of the motor is generally due to the lack of phase of the motor line or the problem of the output port. You can have a basic understanding of your daily use and check the work to ensure the long-term use of the device.
As a professional production and processing manufacturer, woodworking engraving machine manufacturers can provide more introductions. In actual use, you can learn more and analyze according to different problems to ensure long-term use of equipment. I don't know if everyone has a certain understanding? Properly operate the equipment to reduce safety hazards.
