Most of the CNC stone engraving machines on the market now use double cooling, and what is the role of adding water during stone processing? In fact, because the material of the stone is relatively hard, it needs a water-cooled cutter during the engraving process. On the other hand, the water-cooled engraving machine spindle is used to prevent the temperature of the spindle from being too high and to provide a certain protection. If the operator of the engraving machine does not pay attention to the cooling or does not follow the steps, it will easily lead to the situation that the stone engraving machine does not pass the water and dry, causing serious damage to the equipment.
The CNC stone engraving machine must adopt the cooling method during the processing. If the engraving machine is not cooled by water, the main shaft will always be in a state of continuous high temperature heating. It is easy to cause the spindle of the engraving machine to be shaken or misplaced, the speed of engraving is fast and slow, and the processing is very unstable. The stone carving machine spindle will directly affect the precision of the engraving, and if the spindle is misaligned, the engraved workpiece will be misaligned, and the processed stone will be seriously affected.
If the shaft of the stone engraving machine is dry, the spindle will be overheated, causing the spindle of the engraving machine to burn out due to excessive temperature. The spindle is an important part of the engraving machine. If damage occurs, you need to return to the factory for repair or replace it with a new one. Whether it is repairing or replacing, it will seriously delay the processing period of the stone engraving machine, especially when the order quantity is large and the construction period is tight, because the engraving machine can not operate normally and cause serious damage to the enterprise. Therefore, the stone engraving machine must follow the formal operation of the manufacturer's training in the process of processing to ensure the safety of the equipment, in order to bring greater benefits to the enterprise.
