The engraving machine has a vacuum adsorption table and a clamping table. The convex and concave machine can also make an engraving machine with both clamping and adsorption according to the customer's requirements. The following convex and concave machine share the vacuum adsorption pump vacuum pump does not absorb the five points solution.
It can also be made into a woodworking engraving machine with both clamping and adsorption according to the customer's needs. The following is a good way to share the vacuum coating of the woodworking engraving machine.
First, first check whether the motor line voltage is normal;
Second, whether the water circulation air pump adds less water, whether the motor is stuck or not, and the rotating shaft of the motor fan protection net is removed;
Third, the vacuum pump inside the filter blockage cleaning;
4. The countertop or pipe has a gas leakage phenomenon;
5. Reverse the change of the UVW on the motor to change the direction of rotation of the motor.
When customers purchase the engraving machine, they should choose according to their own processing conditions. If you don't know how to choose, you can consult the convex and concave machinery.
